2021

Ana Isabel Boyano Murillo; José Manuel López Guede; Leyre Torre Tojal; Unai Fernández Gámiz; Ekaitz Zulueta; Faustino Mujika Garitano.
Delamination Fracture Behavior of Unidirectional Carbon ReinforcedComposites Applied to Wind Turbine Blades.
MATERIALS (2021). 14 - 3/593 

2020

Jesús María Romera Aguayo; Neftalí Carbajal de la Red; Faustino Mujika Garitano.
A simple analytical method for determining interlaminar shear stresses in symmetric laminates.
STRUCTURES (2020). 25, pp. 683 - 695

Nagore Insausti Irastorza; Itziar Adarraga Usabiaga; Juan De Gracia Igelmo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Numerical assessment of an experimental procedure applied to DCB tests.
POLYMER TESTING (2020).82 - 106288

Nagore Insausti Irastorza; Itziar Adarraga Usabiaga; Neftalí Carbajal de la Red; Faustino Mujika Garitano.
Numerical assessment of the analytical models used to determine flexural and shear moduli in I-Beams when the tensile and compressive moduli are different.
POLYMER TESTING (2020). 81 - 106154 

2019

Ainhoa Arrese Arrese Arratibel; Nagore Insausti Irastorza; Faustino Mujika Garitano; Magdalena Pérez-Galmes; Jordi Renart.
A novel experimental procedure to determine the cohesive law in ENF tests.
COMPOSITES SCIENCE AND TECHNOLOGY (2019). 170, pp. 42 - 50

Nagore Insausti Irastorza; Itziar Adarraga Usabiaga; Neftalí Carbajal de la Red; Faustino Mujika Garitano.
Numerical assessment of the analytical models used to determine flexural and shear moduli in I-Beams when the tensile and compressive moduli are different.
POLYMER TESTING (2019). 81 - 106154

2018

Juan de Gracia De Gracia Igelmo; Ana Isabel Boyano Murillo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Analysis of dcb test of angle-ply laminates including bending-twisting coupling.
COMPOSITE STRUCTURES (2018).

Nagore Insausti Irastorza; Itziar Adarraga Usabiaga; Javier Urruzola Moreno; Faustino Mujika Garitano.
Analysis of the DCB test of angle-ply laminates including residual stresses.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018).

Nagore Insausti Irastorza; Itziar Adarraga Usabiaga; Javier Urruzola Moreno; Faustino Mujika Garitano.
Comparison between the stiffness method and the hybrid method applied to a circular ring.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018). 40:44

2017

Gustavo Vargas Silva; Faustino Mujika Garitano.
Greenstick fracture in composite pultruded rods.
COMPOSITES PART B: ENGINEERING (2017). 110, pp. 106 - 115

Ainhoa Arrese Arratibel; Ana Isabel Boyano Murillo; Juan De Gracia Igelmo; Faustino Mujika Garitano.
A novel procedure to determine the cohesive law in DCB tests.
COMPOSITES SCIENCE AND TECHNOLOGY (2017). 152, pp. 76 - 84

Ana Isabel Boyano Murillo; Juan De Gracia Igelmo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017). 87, pp. 99 - 109

2016

Ana Isabel Boyano Murillo; Juan De Gracia Igelmo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness.
ENGINEERING FRACTURE MECHANICS (2016). 163, pp. 462 - 475

Itziar Adarraga Usabiaga; Jesús María Romera Aguayo; María Asunción Cantera López de Silanes; Nagore Insausti Irastorza; Faustino Mujika Garitano.
Application of the dual integrated force method to the analysis of the off-axis three-point flexure test of unidirectional composites.
JOURNAL OF COMPOSITE MATERIALS (2016). 50, pp. 413- 426.

Faustino Mujika Garitano; Ainhoa Arrese Arratibel; Itziar Adarraga Usabiaga; Usue Oses Orbegozo.
New correction terms concerning three-point and four-point bending tests.
POLYMER TESTING (2016). 55, pp. 25 - 37

2015

Juan De Gracia Igelmo; Ana Isabel Boyano Murillo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
A new approach for determining the R-curve in DCB tests without optical measurements.
ENGINEERING FRACTURE MECHANICS (2015). 135, pp. 274 - 285.

Faustino Mujika Garitano; Mikel Asensio; Gustavo Vargas Silva; Ana Isabel Boyano Murillo; Juan De Gracia Igelmo.
Analysis of a reversible five-point bending configuration based on a novel two-sense suppor.
POLYMER TESTING (2015). 43, pp. 108 - 122

Ana Isabel Boyano Murillo; María Victoria Mollón; Jorge Bonhomme; Juan De Gracia Igelmo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II.
ENGINEERING FRACTURE MECHANICS (2015). 143, pp. 63 - 79

Gustavo Vargas Silva; José Ángel Ramos; Juan De Gracia Igelmo; Julen Ibarretxe; Faustino Mujika Garitano.
In-plane shear behaviour of multiscale hybrid composites based on multiwall carbon nanotubes and long carbon fibres.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015). 34, pp. 1926 - 1936

Cantera MA; Romera JM; Adarraga I; Mujika F.
Modelling and Testing of the Snap-Through Process of Bi-Stable Cross-Ply Composites.
COMPOSITE STRUCTURES (2015). 120, pp. 41 - 52

2014

Cantera MA; Romera JM; Adarraga I; Mujika F.
Modelling of [0/90] Laminates Subject to Thermal Effects Considering Mechanical Curvature and Through-the-Thickness Strain.
COMPOSITE STRUCTURES (2014). 110, pp. 77 -87

Adarraga I; Cantera MA; Romera JM; Insausti N; Mujika F.
The Dual Integrated Force Method Applied to Unidirectional Composites.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2014). 98, pp. 663 - 677

2013

Romera JM; Cantera MA; Adarraga I; Mujika F.
A Top-Down Analytic Approach for the Analysis of Edge Effects of Angle-Ply Symmetric Laminates.
COMPOSITE STRUCTURES (2013). 104, pp. 60 - 70

VICTOR RODRIGUEZ; DANIEL FERNANDEZ; FAUSTINO MUJIKA; JOSE MANUEL MUÑOZ.
Analysis of out-of-Plane Stresses in Sandwich Beams Subjected to Pure Bending with Large Deflections.
JOURNAL OF COMPOSITE MATERIALS (2013). 47, pp. 2809 - 2822

Romera JM; Cantera MA; Adarraga I; Mujika F.
Application of the Submodeling Technique to the Analysis of the Edge Effects of Composite Laminates.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013). 32, pp. 1099 - 1111

Mujika F.
Stress and Displacement Fields in Tensile Tests of Multidirectional Laminates with Flexible Clamped Ends.
JOURNAL OF COMPOSITE MATERIALS (2013). 47, pp. 3465 - 3484

2012

Faustino Mujika Garitano.
A novel approach for the three-point flexure test of multidirectional laminates.
JOURNAL OF COMPOSITE MATERIALS (2012). 46, pp. 259 - 274

Cantera MA; Romera JM; Adarraga I; Mujika F.
Hygrothermal Effects in Composites: Influence of Geometry and Determination of Transverse Coefficient of Thermal Expansion.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012). 31, pp. 1270 - 1281

Mujika F; Vargas G; Ibarretxe J; De Gracia J; Arrese A.
Influence of the Modification with MWCNT on the Interlaminar Fracture Properties of Long Carbon Fiber Composites.
COMPOSITES PART B-ENGINEERING (2012). 43 -3, pp. 1336 - 1340

2011

Vargas G; Mujika F.
Determination of In-Plane Shear Properties by Three-Point Flexure Test of ±45° Anti-Symmetric Laminates.
POLYMER TESTING (2011). 30, pp. 204 - 215. ELSEVIER SCI LTD

Carbajal N; Mujika F.
Determination of Transverse Compressive Strength of Long Fibre Composites by Three-Point Bending of [90(m)/0(n)] Cross-Ply Laminated Strips.
POLYMER TESTING (2011). 30, pp. 578 - 584

Romera JM; Adarraga I; Cantera MA; Mujika. F.
Numerical Analysis of Displacement and Stress Fields of Off-Axis Composites in Three-Point Flexure.
JOURNAL OF COMPOSITE MATERIALS (2011). 45, pp. 671 - 682

Mujika F; Pujana J; Olave M.
On the Determination of Out-of-Plane Elastic Properties of Honeycomb Sandwich Panels.
POLYMER TESTING (2011). 30, pp. 222 - 228

2010

Arrese A; Carbajal N; Vargas G; Mujika F.
A New Method for Determining Mode II R-Curve by the End Notched Flexure Test.
ENGINEERING FRACTURE MECHANICS (2010). 77, pp. 51 - 70

Vargas G; Mujika F.
Determination of In-Plane Shear Strength of Unidirectional Composite Materials Using the Off-Axis Three-Point Flexure and Off-Axis Tensile Tests.
JOURNAL OF COMPOSITE MATERIALS (2010). 44, pp. 2487 - 2507

2009

Vargas G; Arrese A; Carbajal N; Mujika F.
Analysis of In-Plane and Out-of-Plane Thermo-Mechanical Stresses in Un-Symmetric Cross-Ply Curved Laminated Strips.
JOURNAL OF COMPOSITE MATERIALS (2009). 43, pp. 3157 - 3184

Carbajal N; Mujika F.
Determination of Compressive Strength of Unidirectional Composites by Three-Point Bending Tests.
POLYMER TESTING (2009). 28, pp. 150 - 156

Carbajal N; Mujika F.
Determination of Longitudinal Compressive Strength of Long Fiber Composites by Three-Point Bending of [0m/90n/0p] Cross-Ply Laminated Strips.
POLYMER TESTING (2009). 28, pp. 618 - 626

2008

Carbajal N; Vargas G; Arrese A; Mujika F.
Analysis of Thermal Stresses in Unsymmetric Cross-ply Composite Strips.
JOURNAL OF COMPOSITE MATERIALS (2008). 42, pp. 1247 - 1266

Arrese A; Mujika F.
Influence of Bending Rotations on Three and Four-Point Bend End Notched Flexure Tests.
ENGINEERING FRACTURE MECHANICS (2008). 75, pp. 4234 - 4246

2007

Mujika F.
On the Effect of Shear and Local Deformation in Three-Point Bending Tests.
POLYMER TESTING (2007). 26, pp. 869 - 877

2006

Mujika F; Carbajal N; Arrese A; Mondragon I.
Determination of Tensile and Compressive Moduli by Flexural Tests.
POLYMER TESTING (2006). 25, pp. 766 - 771

Mujika F.
On the Difference Between Flexural Moduli Obtained by Three-Point and Four-Point Bending Tests.
POLYMER TESTING (2006). 25, pp. 214 - 220

2005

Mujika F.
New Considerations on the Stress Field in an Off-Axis Tensile Test.
JOURNAL OF COMPOSITE MATERIALS (2005). 39, pp. 1909 - 1929

Mujika F; Valea A; Gañan P; Mondragon I.
Off-axis Flexure Test: A New Method for Obtaining In-plane Shear Properties.
JOURNAL OF COMPOSITE MATERIALS (2005). 39, pp. 953 - 980

2004

Fernández B; Arbelaiz A; Valea A; Mujika F; Mondragon I; I.
A Comparative Study on the Influence of Epoxy Sizing on the Mechanical Performance of Woven Carbon Fiber-Epoxy Composites.
POLYMER COMPOSITES (2004). 25, pp. 319 - 330

2003

Cantero G; Arbelaiz A; Mugika F; Valea A; Mondragon I; I.
Mechanical Behavior of Wood/Polypropylene Composites: Effects of Fibre Treatments and Ageing Processes.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2003). 22, pp. 37 - 50

Fernández B; Mujika F; De Benito A; Mondragon I.
Mechanical Characterization of Woven Carbon Fiber Composites with Poly(methylmethacrylate)-Modified Epoxy Matrices.
POLYMER COMPOSITES (2003). 24, pp. 640 -654

Mujika F; Mondragon I.
On the Displacement Field for Unidirectional Off-Axis Composites in 3 Point Flexure. Part1: Analytical Approach.
JOURNAL OF COMPOSITE MATERIALS (2003). 37, pp. 1041 - 1066.

Mujika F; De Benito A; Mondragon I.
On the Displacement Field for Unidirectional Off-Axis Composites in 3 Point Flexure. Part II: Numerical and Experimental Results.
JOURNAL OF COMPOSITE MATERIALS (2003). 37, pp. 1191 -1217

2002

Mujika F; Mondragon I; Berglund L; Varna J.
45º Flexure Test for Measurement of In-Plane Shear Modulus.
JOURNAL OF COMPOSITE MATERIALS (2002). 36, pp. 2313 - 2337

Mujika F; De Benito A; Fernández B; Vázquez A; Llano Ponte R; Mondragon I.
Mechanical Properties of Carbon Woven Reinforced Epoxy Matrix Composites. A Study on the Influence of Matrix Modification with Polysulfone.
POLYMER COMPOSITES (2002). 23, pp. 372 - 382

2001

Ormaetxea M; Forcada J; Mujika F; Valea A; Martin MD; Marieta C; Goyanes S; Mondragon I.
Ultimate Properties of Rubber and Core-Shell Modified Epoxy Matrices with Different Chain Flexibilities.
JOURNAL OF MATERIALS SCIENCE (2001). 36, pp. 845 - 852

2000 baino lehenagoak

Mujika F; De Benito A; Atxega M; Fernández B; Jauregi M; Nieto P; Mondragon I.
Comportamiento a Fractura Interlaminar en Materiales Composites de Matriz Epoxi Modificada.
PLASTICOS MODERNOS (1998). 75, pp. 247 - 249

Harysmendi I; Miner R; Valea A; Llano Ponte R; Mujika F; Mondragon I.
Strain rate and Temperature Effects on the Mechanical Behavior of Epoxy Mixtures with Different Crosslink Densities.
POLYMER (1997). 38, pp. 5573 - 5577