2024

I. Adarraga, U. Garitaonaindia, U. Oses, F. de Caso, F. Mujika
Analytical determination and numerical validation of the shear factor in annular sector cross sections
STRUCTURES (2024), 62: 106253

F. Mujika, P. Tsokanas, , A. Arrese,  L.F.M. da Silva. 
Energy release rate in bimaterial specimens tested in pure modes I and II
ENGINEERING FRACTURE MECHANICS (2024), 301, 110012

2023

F. Mujika, P. Tsokanas, A. Arrese, P.S. Valvo, L.F.M. Da Silva
Mode decoupling in interlaminar fracture toughness tests on bimaterial specimens
ENGINEERING FRACTURE MECHANICS (2023), 290: 109454

F. Mujika, M. Olave, M.A. Cantera, U. Garitaonaindia, M. Isasa, A. Arrese
On the equivalent flexural and shear moduli of laminated beams: Definition and determination by bending tests
COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING (2023), 175, 107802

2022

A.    Arrese, F. Mujika, J. Renart, C. Sarrado.
Analysis of displacement path dependence in mixed mode cohesive law
ENGINEERING FRACTURE MECHANICS (2022), 276, 108879

2021

Ana Isabel Boyano Murillo; José Manuel López Guede; Leyre Torre Tojal; Unai Fernández Gámiz; Ekaitz Zulueta; Faustino Mujika Garitano.
Delamination Fracture Behavior of Unidirectional Carbon ReinforcedComposites Applied to Wind Turbine Blades.
MATERIALS (2021). 14 - 3/593 

A.    Arrese, I. Adarraga, N. Insausti, J. Renart, C. Sarrado.
Mode II cohesive law extrapolation procedure of composite bonded joints
ENGINEERING FRACTURE MECHANICS, 2021, 244, 107563

I.     Adarraga, N. Insausti, J. De Gracia, U. Oses
Applicability of an experimental procedure applied to DCB tests in adhesive joints
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021), 107, 102843

2020

Jesús María Romera Aguayo; Neftalí Carbajal de la Red; Faustino Mujika Garitano.
A simple analytical method for determining interlaminar shear stresses in symmetric laminates.
STRUCTURES (2020). 25, pp. 683 - 695

Nagore Insausti Irastorza; Itziar Adarraga Usabiaga; Juan De Gracia Igelmo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Numerical assessment of an experimental procedure applied to DCB tests.
POLYMER TESTING (2020).82 - 106288

Nagore Insausti Irastorza; Itziar Adarraga Usabiaga; Neftalí Carbajal de la Red; Faustino Mujika Garitano.
Numerical assessment of the analytical models used to determine flexural and shear moduli in I-Beams when the tensile and compressive moduli are different.
POLYMER TESTING (2020). 81 - 106154 

2019

Ainhoa Arrese Arrese Arratibel; Nagore Insausti Irastorza; Faustino Mujika Garitano; Magdalena Pérez-Galmes; Jordi Renart.
A novel experimental procedure to determine the cohesive law in ENF tests.
COMPOSITES SCIENCE AND TECHNOLOGY (2019). 170, pp. 42 - 50

2018

Juan de Gracia De Gracia Igelmo; Ana Isabel Boyano Murillo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Analysis of dcb test of angle-ply laminates including bending-twisting coupling.
COMPOSITE STRUCTURES (2018).

Juan de Gracia Igelmo; Ana Isabel Boyano Murillo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Analysis of the DCB test of angle-ply laminates including residual stresses.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018).

Nagore Insausti Irastorza; Itziar Adarraga Usabiaga; Javier Urruzola Moreno; Faustino Mujika Garitano.
Comparison between the stiffness method and the hybrid method applied to a circular ring.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2018). 40:44

R. Herrera, A. Arrese, P.L. de Hoyos-Martinez, J. Labidi, R. Llano-Ponte.
Evolution of thermally modified wood properties exposed to natural and artificial weathering and its potential as an element for façades systems
CONSTRUCTION AND BUILDING MATERIALS, 2018, 172, pp. 233–242

Juan de Gracia Igelmo; Ana Isabel Boyano Murillo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano
Analysis of the DCB test of angle-ply laminates including residual stresses
THEORETICAL AND APPLIED FRACTURE MECHANICS (2018).

2017

Gustavo Vargas Silva; Faustino Mujika Garitano.
Greenstick fracture in composite pultruded rods.
COMPOSITES PART B: ENGINEERING (2017). 110, pp. 106 - 115

Ainhoa Arrese Arratibel; Ana Isabel Boyano Murillo; Juan De Gracia Igelmo; Faustino Mujika Garitano.
A novel procedure to determine the cohesive law in DCB tests.
COMPOSITES SCIENCE AND TECHNOLOGY (2017). 152, pp. 76 - 84

Ana Isabel Boyano Murillo; Juan De Gracia Igelmo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Equivalent energy release rate and crack stability in the End Notched Flexure with inserted roller mixed mode I/II test.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2017). 87, pp. 99 - 109

2016

Ana Isabel Boyano Murillo; Juan De Gracia Igelmo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Experimental assessment of an End Notched Flexure test configuration with an inserted roller for analyzing mixed-mode I/II fracture toughness.
ENGINEERING FRACTURE MECHANICS (2016). 163, pp. 462 - 475

Itziar Adarraga Usabiaga; Jesús María Romera Aguayo; María Asunción Cantera López de Silanes; Nagore Insausti Irastorza; Faustino Mujika Garitano.
Application of the dual integrated force method to the analysis of the off-axis three-point flexure test of unidirectional composites.
JOURNAL OF COMPOSITE MATERIALS (2016). 50, pp. 413- 426.

Faustino Mujika Garitano; Ainhoa Arrese Arratibel; Itziar Adarraga Usabiaga; Usue Oses Orbegozo.
New correction terms concerning three-point and four-point bending tests.
POLYMER TESTING (2016). 55, pp. 25 - 37

2015

Juan De Gracia Igelmo; Ana Isabel Boyano Murillo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
A new approach for determining the R-curve in DCB tests without optical measurements.
ENGINEERING FRACTURE MECHANICS (2015). 135, pp. 274 - 285.

Faustino Mujika Garitano; Mikel Asensio; Gustavo Vargas Silva; Ana Isabel Boyano Murillo; Juan De Gracia Igelmo.
Analysis of a reversible five-point bending configuration based on a novel two-sense suppor.
POLYMER TESTING (2015). 43, pp. 108 - 122

Ana Isabel Boyano Murillo; María Victoria Mollón; Jorge Bonhomme; Juan De Gracia Igelmo; Ainhoa Arrese Arratibel; Faustino Mujika Garitano.
Analytical and numerical approach of an End Notched Flexure test configuration with an inserted roller for promoting mixed mode I/II.
ENGINEERING FRACTURE MECHANICS (2015). 143, pp. 63 - 79

Gustavo Vargas Silva; José Ángel Ramos; Juan De Gracia Igelmo; Julen Ibarretxe; Faustino Mujika Garitano.
In-plane shear behaviour of multiscale hybrid composites based on multiwall carbon nanotubes and long carbon fibres.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2015). 34, pp. 1926 - 1936

Cantera MA; Romera JM; Adarraga I; Mujika F.
Modelling and Testing of the Snap-Through Process of Bi-Stable Cross-Ply Composites.
COMPOSITE STRUCTURES (2015). 120, pp. 41 - 52

U. Garitaonaindia; J.L. Alcaraz
Influence of a micro-thread at cervical position and a cylindrical intermediate zone on the mechanical behaviour of dental implants: A three-dimensional finite element analysis
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2015) 229, 9, PP. 670-680
 

2014

Cantera MA; Romera JM; Adarraga I; Mujika F.
Modelling of [0/90] Laminates Subject to Thermal Effects Considering Mechanical Curvature and Through-the-Thickness Strain.
COMPOSITE STRUCTURES (2014). 110, pp. 77 -87

Adarraga I; Cantera MA; Romera JM; Insausti N; Mujika F.
The Dual Integrated Force Method Applied to Unidirectional Composites.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2014). 98, pp. 663 - 677

2013

Romera JM; Cantera MA; Adarraga I; Mujika F.
A Top-Down Analytic Approach for the Analysis of Edge Effects of Angle-Ply Symmetric Laminates.
COMPOSITE STRUCTURES (2013). 104, pp. 60 - 70

VICTOR RODRIGUEZ; DANIEL FERNANDEZ; FAUSTINO MUJIKA; JOSE MANUEL MUÑOZ.
Analysis of out-of-Plane Stresses in Sandwich Beams Subjected to Pure Bending with Large Deflections.
JOURNAL OF COMPOSITE MATERIALS (2013). 47, pp. 2809 - 2822

Romera JM; Cantera MA; Adarraga I; Mujika F.
Application of the Submodeling Technique to the Analysis of the Edge Effects of Composite Laminates.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2013). 32, pp. 1099 - 1111

Mujika F.
Stress and Displacement Fields in Tensile Tests of Multidirectional Laminates with Flexible Clamped Ends.
JOURNAL OF COMPOSITE MATERIALS (2013). 47, pp. 3465 - 3484

2012

Faustino Mujika Garitano.
A novel approach for the three-point flexure test of multidirectional laminates.
JOURNAL OF COMPOSITE MATERIALS (2012). 46, pp. 259 - 274

Cantera MA; Romera JM; Adarraga I; Mujika F.
Hygrothermal Effects in Composites: Influence of Geometry and Determination of Transverse Coefficient of Thermal Expansion.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2012). 31, pp. 1270 - 1281

Mujika F; Vargas G; Ibarretxe J; De Gracia J; Arrese A.
Influence of the Modification with MWCNT on the Interlaminar Fracture Properties of Long Carbon Fiber Composites.
COMPOSITES PART B-ENGINEERING (2012). 43 -3, pp. 1336 - 1340

2011

Vargas G; Mujika F.
Determination of In-Plane Shear Properties by Three-Point Flexure Test of ±45° Anti-Symmetric Laminates.
POLYMER TESTING (2011). 30, pp. 204 - 215. ELSEVIER SCI LTD

Carbajal N; Mujika F.
Determination of Transverse Compressive Strength of Long Fibre Composites by Three-Point Bending of [90(m)/0(n)] Cross-Ply Laminated Strips.
POLYMER TESTING (2011). 30, pp. 578 - 584

Romera JM; Adarraga I; Cantera MA; Mujika. F.
Numerical Analysis of Displacement and Stress Fields of Off-Axis Composites in Three-Point Flexure.
JOURNAL OF COMPOSITE MATERIALS (2011). 45, pp. 671 - 682

Mujika F; Pujana J; Olave M.
On the Determination of Out-of-Plane Elastic Properties of Honeycomb Sandwich Panels.
POLYMER TESTING (2011). 30, pp. 222 - 228

2010

Arrese A; Carbajal N; Vargas G; Mujika F.
A New Method for Determining Mode II R-Curve by the End Notched Flexure Test.
ENGINEERING FRACTURE MECHANICS (2010). 77, pp. 51 - 70

Vargas G; Mujika F.
Determination of In-Plane Shear Strength of Unidirectional Composite Materials Using the Off-Axis Three-Point Flexure and Off-Axis Tensile Tests.
JOURNAL OF COMPOSITE MATERIALS (2010). 44, pp. 2487 - 2507

2009

Vargas G; Arrese A; Carbajal N; Mujika F.
Analysis of In-Plane and Out-of-Plane Thermo-Mechanical Stresses in Un-Symmetric Cross-Ply Curved Laminated Strips.
JOURNAL OF COMPOSITE MATERIALS (2009). 43, pp. 3157 - 3184

Carbajal N; Mujika F.
Determination of Compressive Strength of Unidirectional Composites by Three-Point Bending Tests.
POLYMER TESTING (2009). 28, pp. 150 - 156

Carbajal N; Mujika F.
Determination of Longitudinal Compressive Strength of Long Fiber Composites by Three-Point Bending of [0m/90n/0p] Cross-Ply Laminated Strips.
POLYMER TESTING (2009). 28, pp. 618 - 626

2008

Carbajal N; Vargas G; Arrese A; Mujika F.
Analysis of Thermal Stresses in Unsymmetric Cross-ply Composite Strips.
JOURNAL OF COMPOSITE MATERIALS (2008). 42, pp. 1247 - 1266

Arrese A; Mujika F.
Influence of Bending Rotations on Three and Four-Point Bend End Notched Flexure Tests.
ENGINEERING FRACTURE MECHANICS (2008). 75, pp. 4234 - 4246

2007

Mujika F.
On the Effect of Shear and Local Deformation in Three-Point Bending Tests.
POLYMER TESTING (2007). 26, pp. 869 - 877

2006

Mujika F; Carbajal N; Arrese A; Mondragon I.
Determination of Tensile and Compressive Moduli by Flexural Tests.
POLYMER TESTING (2006). 25, pp. 766 - 771

Mujika F.
On the Difference Between Flexural Moduli Obtained by Three-Point and Four-Point Bending Tests.
POLYMER TESTING (2006). 25, pp. 214 - 220

2005

Mujika F.
New Considerations on the Stress Field in an Off-Axis Tensile Test.
JOURNAL OF COMPOSITE MATERIALS (2005). 39, pp. 1909 - 1929

Mujika F; Valea A; Gañan P; Mondragon I.
Off-axis Flexure Test: A New Method for Obtaining In-plane Shear Properties.
JOURNAL OF COMPOSITE MATERIALS (2005). 39, pp. 953 - 980

2004

Fernández B; Arbelaiz A; Valea A; Mujika F; Mondragon I; I.
A Comparative Study on the Influence of Epoxy Sizing on the Mechanical Performance of Woven Carbon Fiber-Epoxy Composites.
POLYMER COMPOSITES (2004). 25, pp. 319 - 330

2003

Cantero G; Arbelaiz A; Mugika F; Valea A; Mondragon I; I.
Mechanical Behavior of Wood/Polypropylene Composites: Effects of Fibre Treatments and Ageing Processes.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2003). 22, pp. 37 - 50

Fernández B; Mujika F; De Benito A; Mondragon I.
Mechanical Characterization of Woven Carbon Fiber Composites with Poly(methylmethacrylate)-Modified Epoxy Matrices.
POLYMER COMPOSITES (2003). 24, pp. 640 -654

Mujika F; Mondragon I.
On the Displacement Field for Unidirectional Off-Axis Composites in 3 Point Flexure. Part1: Analytical Approach.
JOURNAL OF COMPOSITE MATERIALS (2003). 37, pp. 1041 - 1066.

Mujika F; De Benito A; Mondragon I.
On the Displacement Field for Unidirectional Off-Axis Composites in 3 Point Flexure. Part II: Numerical and Experimental Results.
JOURNAL OF COMPOSITE MATERIALS (2003). 37, pp. 1191 -1217

2002

Mujika F; Mondragon I; Berglund L; Varna J.
45º Flexure Test for Measurement of In-Plane Shear Modulus.
JOURNAL OF COMPOSITE MATERIALS (2002). 36, pp. 2313 - 2337

Mujika F; De Benito A; Fernández B; Vázquez A; Llano Ponte R; Mondragon I.
Mechanical Properties of Carbon Woven Reinforced Epoxy Matrix Composites. A Study on the Influence of Matrix Modification with Polysulfone.
POLYMER COMPOSITES (2002). 23, pp. 372 - 382

2001

Ormaetxea M; Forcada J; Mujika F; Valea A; Martin MD; Marieta C; Goyanes S; Mondragon I.
Ultimate Properties of Rubber and Core-Shell Modified Epoxy Matrices with Different Chain Flexibilities.
JOURNAL OF MATERIALS SCIENCE (2001). 36, pp. 845 - 852

Anteriores al 2000

Mujika F; De Benito A; Atxega M; Fernández B; Jauregi M; Nieto P; Mondragon I.
Comportamiento a Fractura Interlaminar en Materiales Composites de Matriz Epoxi Modificada.
PLASTICOS MODERNOS (1998). 75, pp. 247 - 249

Harysmendi I; Miner R; Valea A; Llano Ponte R; Mujika F; Mondragon I.
Strain rate and Temperature Effects on the Mechanical Behavior of Epoxy Mixtures with Different Crosslink Densities.
POLYMER (1997). 38, pp. 5573 - 5577